First-time setup
Epson / Drivers & setup
Epson L3210 Driver
Get the Epson software for the L3210 from Epson's official support site, see which package to pick for Windows and macOS, and finish with a test print.
L3210 software at a glance
Software packages10
SystemsWindows 6 · macOS 4
Package typesFirst-time setup 2 · Printing 6 · Scanning 2
32/64-bit versionsx86 2 · x64 2
01 Download the L3210 driver
Two ways to download
Official Epson download ↗
Download a package directly from the list below, or get the newest version from Epson's official support site. The official link opens the L3210 page; select your operating system there.
Download a package
Pick the full package for a first-time setup, or only the printer or scanner driver if the printer is already connected. Each Download button creates a one-time link to the file.
Printing
Printer Driver for Windows 32 bit.exe
Printing
Printer Driver for Windows 64 bit.exe
Scanning
Scanner Driver and Epson Scan 2 Utility for Windows.exe
Printing
Remote Print Driver for Windows 32 bit.exe
Printing
Remote Print Driver for Windows 64 bit.exe
First-time setup
Drivers and Utilities Combo Package Installer for mac OS.dmg
Printing
Printer Driver for mac OS.dmg
Scanning
Scanner Driver and Epson Scan 2 Utility for mac OS.dmg
Printing
Remote Print Driver for mac OS.dmg
02 Install and test the L3210
Check the exact model name
Read the full model name on the printer label. It should match L3210 exactly; printers with similar names can need different software.
Download the package for your system
On Epson's support site, choose your operating system version. Pick the full software package for a first-time setup, or just the printer driver if the printer already works with another computer.
Run the installer and connect the printer
Follow the installer prompts for USB or Wi-Fi. For USB, connect the cable only when the installer asks. For Wi-Fi, keep the printer and computer on the same network.
Check that it worked
Print a test page from your system printer settings. To check scanning, open the scanner software and run a preview scan; printing and scanning are installed separately.
03 Troubleshooting
The installer cannot find the printer
Check the connection first. For USB, try another port and cable. For Wi-Fi, make sure the printer shows a network connection on its panel and that your computer is on the same network, then run the installer again.
The printer is installed but shows as offline
Turn the printer off and on, then remove and re-add it in your system printer settings. On Wi-Fi, a changed router or IP address is a common cause.
My operating system is not in the list
Check Epson's support site for your exact system version. Newer versions of Windows and macOS often include a built-in driver for older printers, so try adding the printer in system settings first.
Printing works but scanning does not
Scanning needs its own scanner driver or scan app. Install the scanner package for your system, then select this printer inside the scan software.
04 Sources
Package downloads come from PrinterDriversHub's driver archive; the official links go to Epson's website. PrinterDriversHub is independent and not affiliated with Epson.
Current manufacturer guidance for Epson L3210
Epson India identifies L3210 as C11CJ68506. Its support interface separates operating-system selection from printer and scan package choices; other regions may use a different product code for L3210.
Choose the appropriate setup route
Confirm your regional model entry, system and architecture before selecting a package. Review the printer driver and Epson Scan component independently when both printing and scanning are needed.
Source check: 4 October 2026. Scope: Epson India support, C11CJ68506. Manufacturer documentation and package-purpose guidance checked.